BARM 6000
|
| |
| |
DON 2.0 |
Properties and application
Excellent torque retention properties, good chemical properties and sealability. Recommened for all applications where thermal cycling, saturated or overheated steam are used i.e. heat exchangers, boilers, radiators, steam supply, power generation, etc.
For sealing oils, fuels, gases, refrigerants, solvents, non-aggressive chemicals, hot water and other media in many differented flanged joints.
Basis | Biosoluble mineral fibres, NBR, Wire mesh reinforcement |
DIN 28091-2 | FA-M1-St |
Colour | Black |
Surface treatment
Treatment with graphite, PTFE and antistick coating is available on request.
Technical data
Typical values for a thickness of 2 mm
Density | DIN 28090-2 | g/cm3 | 1.8 - 2.1 |
Compressibility |
| % | 10 |
Recovery | ASTM F36/J | % | <55 |
Tensile strength | DIN 52910 | N/mm2 | ≈18 |
Thickness increase | ASTM F146 | ||
Oil IRM 903, 5h, 150°C | % | ≤ 5 | |
Max. operating conditions | |||
Peak temperature | °C/F | 440/824 | |
Continuous temperature | °C/F | 350/662 | |
- with steam | °C/F | 300/572 | |
Pressure | bar/psi | 130/1885 |
ASTM F 36/J
(copy 3)
Dimensions of standard sheet
Sheet size | mm | 1000x1400, 500x1400 |
Thickness | mm | 0.6, 0.7, 1.2, 1.4, 1.6 |
other dimensions and thicknesses on request
(copy 7)
 | Acetamide |  | Ethane |  | Oleum | ||
| Acetic acid 10% | | Ethyl acetate | | Oxalic acid | ||
| Acetic acid 100% | | Ethyl alcohol | | Oxygen | ||
| Acetic ester | | Ethyl chloride | | Palmitic acid | ||
| Acetone | | Ethylene | | Pentane | ||
| Acetylene | | Ethylene glycol | | Perchloroethylene | ||
| Adipic acid | | Formaldehyde | | Phenol | ||
| Air | | Formic acid 10% | | Phosphoric acid | ||
| Alum | | Formic acid 85% | | Potassium dichromate | ||
| Aluminium acetate | | Freon 12 | | Potassium acetate | ||
| Aluminium chlorate | | Freon 22 | | Potassium bicarbonate | ||
| Aluminium chloride | | Fuel oil | | Potassium carbonate | ||
| Ammonia | | Gasoline | | Potassium chloride | ||
| Ammonium bicarbonate | | Glycerin | | Potassium hydroxide | ||
| Ammonium chloride | | Heptane | | Potassium iodide | ||
| Ammonium hydroxide | | Hydraulic oil (Mineral) | | Potassium nitrate | ||
| Amyl acetate | | Hydraulic oil (type glycol) | | Potassium permanganate | ||
| Aniline | | Hydraulic oil (type phosphate esther) | | Propane | ||
| Asphalt | | Hydrazine | | Pyridine | ||
| Barium chloride | | Hydrochloric acid 20% | | Salicylic acid | ||
| Benzene | | Hydrochloric acid 36% | | Silicone oil | ||
| Benzoic acid | | Hydrofluoric acid 10% | | Soap | ||
| Blast furnace gas | | Hydrofluoric acid 40% | | Sodium aluminate | ||
| Borax | | Hydrogen | | Sodium bicarbonate | ||
| Boric acid | | Isobutane | | Sodium bisulphite | ||
| Butane | | Isopropyl alcohol | | Sodium carbonate | ||
| Butyl alcohol | | Kerosene | | Sodium chloride | ||
| Butyric acid | | Lead acetate | | Sodium cyanide | ||
| Calcium chloride | | Lead arsenate | | Sodium hydroxide | ||
| Calcium hydroxide | | Magnesium sulphate | | Sodium sulphate | ||
| Carbon bisulphide | | Malic acid | | Sodium sulphite | ||
| Carbon dioxide | | Methane | | Starch | ||
| Chlorine, dry | | Methanol | | Steam | ||
| Chlorine, wet | | Methyl chloride | | Stearic acid | ||
| Chloroform | | Methyl ethyl ketone | | Sugar | ||
| Chromic acid | | Methylene dichloride | | Sulfuric acid 20% | ||
| Citric acid | | Milk | | Sulfuric acid 96% | ||
| Copper acetate | | Mineral oil type ASTM 1 | | Tar | ||
| Creosote | | Naphtha | | Tartaric acid | ||
| Cresol | | Nitric acid 20% | | Toluene | ||
| Cyclohexanol | | Nitric acid 40% | | Transformer oil | ||
| Cyclohexanone | | Nitric acid 96% | | Trichloroethylene | ||
| Decalin | | Nitrobenzene | | Water | ||
| Dibenzylether | | Nitrogen | | White spirit | ||
| Dimethyl formamide | | Octane | | Xylene | ||
| Dowtherm | | Oleic acid |  |
Legend
|
totally satisfactory | |
doubtful | |
totally unsatisfactory |  |
no data - please contact our Technical service |